RedOne RO-DF6L, Руководство пользователя

Страница: 7 / 9

Notice
● This equipment must be operated by trained professionals.

Modification of this product may cause serious accident.
●
Do not clean the product with a water jet or expose the electrics to water while cleaning.
●
Do not use another power supply with different voltage.
Do not use main switch that is not coordinated with safety regulation.
● Do not damage the body of the fryer.
● Turn off when not in use.
●The installation and maintenance of electric circuit must be carried out by qualified
engineers
●If power cable is damaged; it should be changed by a qualified engineer.
Warning!
●
When using, hand, plug and switch must be dry.
●
Oil should not be lower than the indicated minimum oil level.
●
Do not allow switch on unless there is sufficient oil in the tank.
●
Do not use water to clean the electric box directly or soak the electric box in
water to clean.
●
Do not use old oil to fry because it will cause over boiling.
●
Do not fry wet food or overfill the fryers.
E. Troubleshooting
Troubles Causes Solution
1. The Machine is plugged in
but not working. 1. Plug is not inserted
properly
2. Micro-switch contacts
not correct.
1. Replace the plug firmly
2. Check Fuse.
3. Adjust the limit distance of
micro-switch
2. Heating indicator is not on
and temperature is not
raised. 1. Element connection is
loose. 1. Tighten element connection
2. Change element
3. Power indicator is on but
temperature is not rising. 1.Temperature controller is
faulty. 1. Change temperature
controller.
4. Temperature control is
normal but indicator is not
on. 1. Indicator is faulty. 1. Change indicator.
5. After circuit heating
element is not heating. 1. Temperature limiter
working.
1. Reset “over heating
protecting button”