Redon GTR, Руководство пользователя

Страница: 39 / 88

39
USER INTERFACE / RUN
RUN Main Screen / AUTO
After selecting the programs to be run in the LOAD section, press the AUTO menu button.
Press the START button. Then, the machine will start to run in fully automatic mode. The doors will automatically
close, the required tool will be automatically received, and its height will be measured. Cooling will be
automatically turned on as necessary, and the machine will start milling.
The Spindle Speed indicator shows the current speed of the spindle. The value is shown in rpm.
The F bar represents the Feed which proportionally increases or reduces the machine’s speed. The F bar’s range of
value is between 0% and 100%. When it is set to 0%, the axes of the machine completely stop. In normal operation, this
value must be set to
100%.
The S bar represents the Speed which proportionally increases or reduces the spindle speed. The S bar’s range
of value is between 0% and 100%. When it is set to 0%, the spindle completely stops. In normal operation, this
value must be set to
100%.
1
2
3
4
5
Axis Coordinates Toolpath
1 2
3 4 5