NOTE
: During cooking, if water temperature becomes 2 degree
lower than set temperature, the appliance start to heat again, the
alarm will beep when the water temperature same as set tem-
perature .
NOTE
: During operation,press set button,it only could check
settemperature,could not make any setting.if need to set,press
“ ” button,appliance will stop working and current temperature
flashing,it’s in standby mode and then repeat the setting as
above
mode,press the set button for one time,then Press the” + “or “–
“adjust the temperature,if you would like to revise the time in
this mode,press the set button for two times,then press the” +
“or “– “adjust the time.If setting is ok,press “ ” button to
start the appliance to work.
If you are in the fourth recipe mode and would like to back to
the first recipe mode,just press the ” + “ for one time.The
recipes can be altered by ” + “or “– “ in turn of circle.
8.Press the set button for 3 seconds, change the temperature
degree by Celsius or Fahrenheit as you like.The system default
is 60
℃
.
9.
After finish all setting, Press the “ ” button, you will hear a
beep sound and the appliance will work,when reach to the
setting temperature, setting time will start counting down.
When setting time 00:00 is reached, the appliance will stop to
heat,but screen is on,beep for 3 minutes meanwhile current
temperature flashing for 3 minutes,then the appliance will be
turned off.
10.During setting,Keep no operation for six seconds,will skip to
current temperature flashing mode.
11.When the current temperature of water reach to the set
temperature, set time will start counting down. At the same
time, the alarm will beep four times to indicate that you can
now immerse your sealed bag of ingredients for cooking.
