10
After transportation or storage at low temperature allow the appliance to stay at room temperature
for at least 2 hours before use.
Wipe the housing with a damp cloth, rinse the bowl with warm water, and let dry. To eliminate unwanted
odour during the first use thoroughly clean the appliance following the procedure outlined in the
Cleaning and Maintenance section of this manual.
Place the appliance on a flat, stable, and horizontal surface away from wallpaper, decorative
coatings, electronic appliances, or any other objects or cabinets that could be damaged by
steam, humidity, or high temperature.
Before operating, make sure that the outer and inner parts of the pressure multicooker have
no dents, cracks or any other visible damages. There should not be any obstructions between
the heating element and the bowl.
ATTENTION! It is forbidden to lift the device with the filled bowl by the handle.
ATTENTION! It is forbidden to lift the device by the handles of the bowl!
Do not switch the device on without the inside of the bowl or empty bowl — in case of accidental
start of the cooking program it will lead to a critical overheating of the device or damage the
non-stick coating. Before frying products, pour a little vegetable or sunflower oil into the bowl.
II. OPERATION
The Ready for Sky technology
The Ready for Sky technology enables to use the software app of the same name to control
the appliance remotely from a smartphone or tablet.
1. Download the software from the App Store or Google Play (depending on your operating
system) onto your smartphone or tablet.
For the minimum supported OS version, see the company’s official website www.redmond.
company or the application description at the App Store and Google Play.
2. Open the Ready for Sky app, create an account, and follow the prompts that appear on the
screen.
3. Enable the Bluetooth function on the appliance. To do this, press and hold down the
TimeDelay button, the beep will be supplied, and the button indicator will come on. The
appliance should be in the standby mode (the display is not illuminated).
The remote control of SkyCooker RMC-M92S-E is only possible when the Bluetooth function is
on (the “Отложенный старт” button indicator in standby mode is always on).
4. Press and hold down the “Час” button for 5 seconds on the control panel of the multicooker.
The appliance should be in the standby mode (the display is not illuminated).
5. The changing symbols
and
will be displayed during connection on the multicooker
display. After the connection is made an audible signal will be heard and appliance will
switch to the standby mode.
6. To disable the multicooker from the mobile device press and hold down the “Мин” button
until an audible signal is heard, when the multicooker is in the standby mode.
7. To turn off the Bluetooth function, in the standby mode of the appliance press and hold
down the “Отложенный старт” button, the button indicator will go off.
To provide stable connection the mobile device should be located within no more than 15 metres
from the appliance.
Appliance control via the wireless network. Instruction on the R4S Gateway application installation is available through the
link:
www.readyforsky.com/r4sgateway
Non-volatile memory
REDMOND SkyCooker RMC-M92S-E has a non-volatile memory. In the event of a power outage
while the cooking program is running, the settings are stored in the appliance’s memory. When
the power is restored, the display will remain on until the power is turned off.
If the temperature difference in the bowl is less than 5°C when the power is switched off and
on, the appliance will continue to operate.
If the temperature difference is greater than 5°C, the program will be paused – the time indicator
and the running program indicator will flash on the display. There is no countdown of cooking
time. At the same time, once a minute for half an hour 1 beep will sound.
To continue the cooking process, press and hold down the “Старт” button. The cooking time
indicator will be on continuously. The countdown will continue.
If the cooking process does not continue for 30 minutes, the appliance will go into the standby
mode. Press and hold down the “Отмена/Разогрев” button to stop the cooking indicator from
blinking.
If the power supply is turned off during the time delay operation, the display will remain on
when the power is turned on until the time delay function indicator flashes, the cooking program
will continue to work.
To interrupt the time delay, press and hold down the “Отмена/Разогрев” button.
Setting The Cooking Time
The multicooker allows manually adjusting the cooking time, set by default for each program
(except “ЭКСПРЕСС”). Time adjustment range and interval depend on the program of cooking
selected.
The time indicator will start flashing when the cooking program is selected. To increase the hour
value press the “Час” button, to increase the minute value – the “Мин” button. Press and hold the
corresponding button down to scroll through the digits.
In certain automatic programs countdown starts only when the device reaches its operating
temperature. E.g. If you set “ТУШЕНИЕ” program on 5 minutes, the countdown of the program
begins only when the water comes to a full boil providing enough steam.
In “МАКАРОНЫ” program, the countdown begins after water starts boiling and “Старт” button
is being repressed.
Содержание SkyCooker RMC-M92S
