Redmond RTP-805, Руководство пользователя

Страница: 13 / 16

RTP-805
13
ENG
UKR
KAZ
Removing and installing the appliance lid (scheme
A4
, p. 5)
Press the lidr latch and pull it up. Open the lid to 45°, press the
lid release button on the back of the thermopot, and remove the
lid.
To reattach the lid, insert the metal pin on the back of the lid into
the groove on the body, holding the lid at an angle 45°. Gently
check if the lid is installed securely.
Daily care
It is recommended to discharge the remaining water completely
every day, otherwise its taste will deteriorate with refilling, and
probability of scale occurrence on the walls of the tank will in-
crease. After water discharge, wipe the tank walls with a clean
descaling cloth.
Body and lid cleaning
Clean the appliance body and the lid with a damp soft cloth oc-
casionally. Remove gross contamination with mild detergents. Dry
the appliance completely before use.
Cleaning the water tank
Clean the water tank with a damp sponge. Do not use ordinary
detergents: they may leave unpleasant odour and spoil taste of
water.
Descaling
During operation, depending on composition of the water used,
plaque and scale may form on the heating element and the in-
ternal walls of the appliance. Use special non-abrasive agents for
cleaning and descaling kitchen appliances to remove them. Follow
the cleaning agent manufacturer's instructions. After cleaning,
discharge the solution and rinse the tank thoroughly with cold
water. Wipe the water tank with a damp cloth. To eliminate unpleas-
ant odour of the cleaning agent, fill the water tank up to the
maximum mark, boil it and then drain it.
Storage and transportation
Before repeated operation or storage completely dry all parts of
the appliance. Store the assembled appliance in a dry, ventilated
place away from heating appliances and direct sunlight.
During transportation and storage, do not expose the device to
mechanical stress, that may lead to damage of the device and/or
violation of the package integrity.
Keep the device package away from water and other liquids.
IV. BEFORE CONTACTING SERVICE
CENTER
Problem Possible cause Solution
The appliance does not
switch on
No power supply
Connect the appliance to a
properly working electric socket
Error message is dis-
played on the screen
“Е1”, “Е3” or “E7”
System error
Unplug the appliance, after
5 minutes, plug it back into the
mains. If the appliance still doesn’t
work, apply to the service center