Redmond RTP-805, Руководство пользователя

Страница: 12 / 16

12
If the current temperature of water in the thermopot is higher
than the set temperature, just press the button to turn on the
cooling mode.
If the current temperature of the water in the thermopot is
lower or equal to the set temperature, the cooling mode will not
start and five beeps will sound. In this case, if you want to cool
water even more, first press the button, use the and
buttons to set the desired water temperature and press the
button.
6. After the water has cooled, the button indicator will turn
off and the current temperature digital indicator will return
to displaying water temperature.
Timer setting
The on-delay timer will help you reduce energy costs.
1. To set the standby timer, press the button, the indicator
of the button will flash, and the hour value will flash on the
digital display.
2. Use the and buttons to set the timer value from 1 to
12 hours in 1 hour increments.
3. Set the required operating mode of the thermopot in accord-
ance with the Sections “Water-temperature maintenance
mode” and “Water cooling mode”.
4. Once you have set the required operating mode, the timer
will start counting down. The display will show the set water
temperature and the timer value; the indicators of the
and buttons will be constantly lit.
5. When the timer is reset, the indicator of the button will
turn off; the thermopot will start working in the selected
mode. The digital indicator of current temperature will
return to displaying the temperature of the water in the
thermopot.
Autonomous water supply function
You can pour water from the thermopot even when it is discon-
nected from the mains. To do this, install the batteries (not in-
cluded) into the appropriate compartment and connect it to the
thermopot, as shown in Figure A3 , page 5. Water is supplied in
the same way as when it is connected to the mains.
Installing the battery ensure that your hands and the unit are
dry.
III. CLEANING AND MAINTENANCE
Before cleaning, unplug the appliance. Remove the appliance lid,
drain water through the left side (mark on the body) and let
it cool down completely.
DO NOT immerse the appliance in water or wash under running
water! DO NOT clean with abrasives or chemical substances not
recommended for items that come into contact with foodstuffs.
Do not drain water through the control panel or the back. Do not
allow water to enter the socket of the power cord.
CAUTION! Before using the appliance again, make sure that the
electrical contacts are completely dry!