manualshive.com logo in svg

RedMax CHTZ60, Руководство по ремонту, Страница: 26 / 52

Поделиться
Скачать
RedMax CHTZ60 Скачать руководство пользователя страница 26

5. Make sure that there are no leaks.

7.9.4 To adjust the carburetor

To adjust the carburetor means that you adjust the

engine to the local conditions such as weather, altitude

and fuel.
The carburetor has 3 adjustment controls.
•

L = low speed jet

•

H = high speed jet

•

T = idle adjustment

The low speed jet and the high speed jet adjust the fuel

flow to align with the airflow from the throttle valve

opening. Turn the low speed jet and high speed jet

clockwise to decrease the quantity of fuel. Turn the low

speed jet and high speed jet counterclockwise to

increase the quantity of fuel. Less fuel increases the

engine speed and a more fuel decreases the engine

speed.
The idle speed screw controls the throttle position. Turn

the idle speed screw clockwise gives fast idle speed,

turn it counterclockwise gives lower idle speed.
The high speed jet and the low speed jet in the

carburetor can only be adjusted with the special tool.

Refer to 

Servicing tools on page 10.

L

H

T

Basic factory settings

H = high speed jet

1.5

L = low speed jet

1

7.9.5 To remove and install the intake manifold

1. Remove the starter unit. Refer to 

To remove and

install the starter unit on page 14.

2. Remove the air filter. Refer to 

To remove and install

the air filter on page 17.

3. Remove the carburetor. Refer to 

To remove and

install the carburetor on page 23.

4. Remove the 4 screws, the intake manifold, and the

intake manifold gasket.

5. Install in the opposite sequence.

26 - Repair instructions

1351 - 002 - 25.11.2020

Содержание CHTZ60





















































Отзывы:

Нет отзывов