RedMax BTR250PL, Руководство по ремонту, Страница: 9 / 64

5.6 To replace the handle
1. Loosen the the 2 screws and remove the parts from
the shaft.
2. Assemble in opposite sequence.
5.7 To replace the shaft
1. Disassemble the handle and the operating handle.
See
To disassemble the operating handle on page
14
2. Disassemble the wear guard below the battery
housing. See
To disassemble and assemble the
battery housing wear guard on page 13
3. Disassemble the battery housing. See To
disassemble the battery housing on page 14
4. Disassemble the trimmer cord guard. See
To
disassemble the trimmer guard on page 13
5. Disassemble the motor. See
To disassemble the
motor on page 9
6. Loosen the 4 screws and the plate holding the shaft.
7. Replace the shaft and the plate if necessary and
screw on the battery housing.
8. Assemble the product in opposite sequence.
5.8 To repair damaged threads
1. If the plastic threads in the chassis are damaged,
make a hole with a 4.5 mm drill bit.
2. Replace the original screw with the screw 503 21
74-16 - IHSCT MT5x16.
5.9 To change trimmer line
"Click"
1
2
3
5
6 7
9
6,0 m
18'
4
8
3,05 m
9'
2
,0
m
m
.0
8
0
"
10 cm
4"
6"
15 cm
T25B
5.10 Motor
5.10.1 To disassemble the motor
1. Disassemble the trimmer head. See
To replace the
trimmer head on page 7.
2. Dismantle the trimmer guard.See
To disassemble
the trimmer guard on page 13.
3. Dismantle the operating handle. See
To
disassemble the operating handle on page 14.
4. Dismantle the wear guard under the battery housing.
See
To disassemble and assemble the battery
housing wear guard on page 13.
572 - 001 - 28.03.2018 Repair instructions - 9