6
TEST SYSTEM
1. Press “VEHICLE SELECT” to select desired vehicle configuration:
2. Press “PRESSURE SELECT” to select desired test pressure:
3. Press “TEST SYSTEM” Switch to begin Leak Down test
• Machine self pressurizes to set testing pressure
• Machine performs pressure settling cycle may take
several minutes
• Leak Down Test: 60 SECONDS
• Display will indicate “PASS” or “FAIL” and Decay PSI
4. Press RESET/STOP to end test or press TEST SYSTEM to
retest vehicle
5. If RESET/STOP is pressed to end test, depressurize system after
test by pressing SYSTEM BLEED Switch
LEAKDOWN TEST
h
h
h
h
h
h
h
h
h
h
LEAK TEST COMPLETE
DECAY: .1 PSI PASS
RESET TO CLEAR
TEST TO REPEAT
SYSTEM PRESSURIZED
PRESS BLEED TO DRAIN
CAUTION
BRAKES MAY ENGAGE
SYSTEM PRESSURIZED
PRESS BLEED TO DRAIN
CAUTION
BRAKES MAY ENGAGE
LEAK TEST ACTIVE
TEST END: 24 SECONDS
DECAY: 4.2 PSI
RESET TO STOP TEST
CALIBRATING
TEST START: 58 SECS
SETTLING
117.4 PSI
LEAK TEST COMPLETE
DECAY: .1 PSI PASS
RESET TO CLEAR
TEST TO REPEAT
• TRAILER
• TRACTOR
• TRACTOR/TRAILER COMBINATION
• TRACTOR AND TWO TRAILER
COMBINATION
• 100 PSI
• 115 PSI
• 125 PSI
NANOLEAK FINDER
VEHICLE: TRAILER
TEST PRESSURE:115PSI
PRESSURE IN:118PSI
NANOLEAK FINDER
VEHICLE: TRAILER
TEST PRESSURE:115PSI
PRESSURE IN:118PSI
