AN-50 User Manual
24/52
Red
line Communications
…..solving the first mile challenge
.
Tx bytes:
Indicates the total number of bytes transmitted over the air.
Tx bytes - discarded:
Indicates the number of bytes with errors transmitted
over the air to the remote terminal.
Tx packets:
Indicates the number of wireless packets (including Ethernet
frames and error correction bytes) transmitted over the air by the local
terminal.
Tx packets - retransmitted:
Indicates the number of packets retransmitted
over the air by the local terminal. The retransmission scheme is based on
the Acknowledge/Request (ARQ) algorithm that detects when packets are
lost and makes a request to the MAC scheduler to repeat transmission of
the lost packets.
Tx packets - discarded:
Indicates the total number of packets lost over the
air due to degradation in the RF link.
6.3.
Configuration
The configuration page provides a simple to use Graphical User Interface (GUI)
for the operator to input the complete set of system parameters for both the
Ethernet and Wireless components of the AN-50 unit (refer to ). To store the
parameters into memory, press the
‘Save Configuration’
button from the bottom
of this page. This operation will be recorded into the ‘
Log file’
.
The Ethernet configuration includes the following fields:
Ethernet Configuration:
Device name:
The device name is an alphanumeric identifier for the local
terminal, which can consist of any combination of letters and numbers.
The default name for the AN-50 system from the factory is set to WEB01.
The device name remains with the system, even during power off states,
until the operator re-types a new name using this menu field.
