AN-50 User Manual
11/52
Red
line Communications
…..solving the first mile challenge
.
Third Party
Switch/Router
To Core
Network
CAT 5
STP
Cable
The rear of the terminal comprises two interfaces; the power cord interface, and
F-Type female connector to which the IF cable attaches.
4.2.
The AN-50 Transceiver/Antenna at a Glance
The AN-50 transceiver is mounted to the back of the flat plate antenna, as shown
in Figure 2. The antenna features a bracket to mount onto a 1-inch pole.
Front
View
Transceiver
Back
View
Pole
Mounting
Bracket
Flat
Plate
Antenna
Figure 2 Antenna/Transceiver close up.
The pole is approximately three (3) feet in length and features a curve profile to
facilitate protruding building infrastructures, such as eaves. A mounting bracket
at the bottom of the pole is used to attach the antenna to sides of buildings or onto
other poles of varying diameters.
Before connecting the AN-50 system, it is important to review the important
safety tips provided in the beginning of this manual.
