Redline Communications WiMAX Forum Certified RedMAX AN-100U Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 38

Redline Communications WiMAX Forum Certified RedMAX AN-100U Скачать руководство пользователя страница 2

Red

MAX

™

AN-100U

installation guidelines

Doc #70-00059-01-00

Proprietary Redline Communications © 2006

May 30, 2006

Page 2 of 38

Copyright Information

All rights reserved May 30, 2006. The information in this document is

proprietary to Redline Communications Inc. This document may not in whole

or in part be copied, reproduced, or reduced to any medium without prior

consent, in writing, from Redline Communications Incorporated.

Contact Information

Redline Communications Inc.

302 Town Centre Blvd. Suite 100

Markham, ON

Canada L3R 0E8

Web site:

http://www.redlinecommunications.com

Sales Inquiries:

North

American

Toll-free sales line

International

[email protected]

1-866-633-6669

[email protected]

Support:

Email

Telephone

[email protected]

Contact your Redline Distributor

Source Document ID:

70-00059-01-00-RedMAX_AN-100U_Installation_Guide-
20060530a.doc

Disclaimer

The statements, configurations, technical data, and recommendations in this
document are believed to be accurate and reliable, but are presented without
express or implied warranty. Additionally, Redline makes no representations or
warranties, either expressed or implied, regarding the contents of this product.
Redline Communications shall not be liable for any misuse regarding this product.
The information in this document is subject to change without notice.

«
1
2
3
4
...
»

Содержание WiMAX Forum Certified RedMAX AN-100U







































Отзывы:

Нет отзывов