Redline Communications RedCONNEX AN-80i Скачать руководство пользователя | Manualshive

Страница: 32 / 128

background image

&

User

AN-80i

Manual

70-00072-01-08b

Proprietary Redline Communications © 2009

Page 32 of 128

June 4, 2009

100

- Operate at 100Base-T only.

HD

- Operate at half-duplex only.

FD

- Operate in full duplex only.

Important

: The auto-negotiate feature does not detect the speed and duplex of

manually set Ethernet equipment. The auto-negotiate feature works correctly only
when both communicating Ethernet devices are configured for auto-negotiate. Duplex
mismatches may result in an unexpected loss of communications.

It is recommended to manually configure Ethernet devices to 100Base-T / full duplex.

HTTP Enable

:

Check this box to enable the HTTP (Web) interface. If the option is

deselected, only CLI commands will be available.

HTTPS Enable

: Check this box to enable HTTPS operation (secure/encrypted Web

session). Refer to section 7.2.1: Using SSH for Secure Telnet Access on page 108 for
information on security certificates and keys.

Telnet Enable

: Check this box to enable a Telnet access (CLI) to the AN-80i.

SSH Enable

: Check this box to enable SSH operation (secure/encrypted CLI). Refer to

7.2.1: Using SSH for Secure Telnet Access on page 107 for information on security
certificates and keys.

Telnet Port

: Enter Telnet port address (default is 23).

SNMP Enable

: Check this box to enable the Simple Network Management Protocol

(SNMP) agent. When this item is checked, click on the blue text

[

Configure SNMP

]

adjacent to the check box to display the SNMP Configuration screen. Refer to section
3.6.2 SNMP Settings Screen on page 33.

Mgmt. Tag Enable

: Check this box to enable VLAN tagged management traffic.

The Mgmt Tag Enable setting is disabled (factory default) when shipped from the factory
or following a long-reset operation. In this mode the PTP Master and PTP Slave can be
managed through the local Ethernet port using untagged traffic. Over-the-air
management is possible only after creating a pass-through group and pass-through
connections for each PTP Slave.
When Mgmt Tag Enable is enabled, this PTP Master or PTP Slave can be managed
only using VLAN traffic tagged with the value specified in the Mgmt. VID field. Over-the-
air management is possible only after creating a VLAN tagged group and VLAN tagged
connections for each PTP Slave.
It is recommended to create and test a VLAN group for tagged management traffic
before activating the Mgmt Tag Enable function. Set the associated QoS and priority
values to ensure management traffic has adequate priority and bandwidth during system
operation.

Mgmt. VID

: Enter the VLAN ID. When Mgmt. Tag Enable is selected, the system

recognizes only management commands with this VLAN ID.

Important

: The VLAN network support should be verified before enabling this feature

to ensure the AN-80i system will be reachable using the VLAN tagged traffic.

«
...
30
31
32
33
34
...
»

Содержание RedCONNEX AN-80i

































































































































Отзывы:

Нет отзывов

Похожие инструкции для RedCONNEX AN-80i

Бренд: Sven Страницы: 12

Бренд: CAME Страницы: 32

Бренд: VCON Страницы: 48

Бренд: N-Com Страницы: 20

Бренд: N-Com Страницы: 28

Бренд: heat-timer Страницы: 40

Бренд: The Fisher Страницы: 20

Бренд: Ruida Technology Страницы: 35

Collaborate FHD

Бренд: ClearOne Страницы: 82

Бренд: Planet Страницы: 51

Бренд: SPINOGY Страницы: 27

20/20 SeedSense

Бренд: Precision Planting Страницы: 65

Бренд: Prentke Romich Company Страницы: 264

Бренд: Cirrus Logic Страницы: 90

Бренд: AudioBahn Страницы: 14

Бренд: Spracht Страницы: 24

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды