RedHotDot HANDUCTION F-1, Руководство пользователя

Страница: 4 / 17

HA
NDUCTION F-1
4
EN
and smoke). Make sure the mask fits in size. Change filters regularly. DISPOSABLE
MASKS ARE NOT SUITABLE.
Always wear protective clothing and protective gloves with appropriate thermal resistance
when using the induction heater. High temperatures obtained during use of the induction
heater can cause severe burns if you touch the heated part.
4.2. Electrical safety rules
Do not curl or twist the power cable, as this may damage internal wires. Never use the
induction heater if the power cable is damaged. Keep the power cable away from heat, oil,
sharp edges and moving parts.
If the power cable is damaged, it must be replaced. The damaged cable creates the risk of electric shock. Use
electrical wires only for its intended purpose! Do not use wires to carry the induction heater.
Disconnect HANDUCTION F-1 from the power supply (socket) before replacing an inductor. If you are not using
HANDUCTION F-1, unplug the power cable plug from the socket. Do not detach the inductors from
HANDUCTION F-1 by jerking or pulling them. If HANDUCTION F-1 is working when the inductor contacts are
detached, non-warranty damage of the internal electronics may occur.
Never use the induction heater unless the inductor is installed. Do not use HANDUCTION F-1 during rain or high
humidity and do not immerse it into water. Contact of the device with water and other liquids can lead to the risk of
electric shock.
ATTENTION!
This product is intended for industrial use. It can create radio interference in the mains. The
product is not intended for use in residential and office buildings and connection to the
common mains; The user must take appropriate measures to reduce interference.
4.3. Fire safety rules
Strictly follow fire safety rules and regulations in accordance with the local legislation when
working with the induction heater.
The room in which the device is used must be equipped with primary fire extinguishing means: chemical foam,
sand, inert gas, carbon dioxide fire extinguishers.
Do not heat containers that may contain aerosol or other flammable liquids, metal vessels, or any pressurized vessels
used to store fuel, compressed gases, and liquids. The heat generated by the induction heater can cause them to
explode and their contents may ignite.
Do not use the inductor with damaged insulation for heating. An insulation defect can cause sparks when in contact
with metal objects or between coils of a spiral. There may be danger of explosion or fire when working on / or near
gas pipes and / or gas cylinders. Using an inductor with damaged insulation will void the warranty.
4.4. Safety rules at work
Do not leave the HANDUCTION F-1 unattended when it is connected to the mains. Ensure
that the device cools normally. Make sure that the air vents are clean and free from dust and
dirt so as not to reduce the flow of cooling air. Do not attempt to repair the
HANDUCTION F-1 yourself.
Before connecting the HANDUCTION F-1 to the mains, make sure that the mains voltage
is as required. If the mains voltage does not meet the required value, it may damage the
HANDUCTION F-1.