28
17.1.2
START/STOP PROCEDURE OF THE VACUUM-UNIT
Since the vacuum-unit is integrated with the basic Verti-Top machine, additional
settings for the vacuum-unit are not required. Only the desired suction force setting
is needed (see Chapter 17.1.1).
When using the Verti-Top/Vacuum-Unit combination, protect yourself
against hearing impairment by using the proper protection gear!
17.1.3
EMPTYING THE DUST BAG
1
2
3
4
5
Figure 20
Emptying the dust bag is done as follows
(see Figure 20)
:
Make sure that the tractor/Verti-Top is blocked well and cannot move
on its own accord!
Switch off the tractor before descending!
Make sure that the Verti-Top can no longer operate when emptying
the dust bag!
Wear the proper personal protection gear when emptying the dust
bag!
1. Open the door (1) of the vacuum box.
2. Loosen the taut band (2).
3. Remove the dust bag (3) from the hooks (4) and take it out.
4. Empty the dust bag (3).
5. Hang the dust bag (3) on the hooks (4) and fixed to the suction mouth (15).
6. Tighten the taut band (2).
BE CAREFUL not to get any parts of your body jammed!
7. Close the door (1) of the vacuum box and lock it.
Remove waste according to the applicable stipulations of the local
legislation.
