8
Position 1
Position 2
Position 3
1
2
Figure 6
2.0
FIRST INSTALLATION – TAKING THE MACHINE
OFF THE PALLET
The machine is placed vertically on the pallet. To remove the pallet and to
place the machine horizontally on the ground, you take the following
steps
(Figure 6):
NEVER CRAWL UNDER THE MACHINE!
1. Remove the rear cap.
2. Attach a cable to the lifting eye of the gearbox in the machine.
(Figure 6 Position 1)
Make sure that the cable/crane/lift can hoist minimum 2,000 kg (4,400 lbs).
3. Lift the machine including the pallet 50 mm (2”) off the ground.
4. Take care that the machine is standing on the edge of the pallet.
(Figure 6 Position 2)
5. Lower the machine controlled and calmly until it stands completely on the
subsoil.
(Figure 6 Position 3)
CAREFUL: KEEP YOUR DISTANCE; THE MACHINE CAN SLIDE!
6. Dismantle the uppermost 3-point pin 1.
7. Remove the bottom 3-point pins 2 and remove the pallet.
