10
4.0 CONNECTING TO THE TRACTOR
Inspection procedure before starting to connect the Verti-Groom.
−
Visually inspect the Verti-Groom for signs of damage and repair them if they
endanger the safe operation of the machine.
−
Make sure that all nuts and bolts are properly tightened.
−
Check whether all safety stickers are present and undamaged on the
machine.
The machine may NEVER be used if this is not the case.
Fig. 8
The Verti-Groom can be connected to the tractor by means of the 3-point connection.
This is done as follows:
(Fig 8.)
1. Remove the 3-point pins 1 and 2.
2. Drive the tractor carefully in reverse so that the low connection arms can be
connected to the frame.
!! Ensure that the tractor is well blocked and cannot start moving by itself !!
!! Switch the tractor off before dismounting !!
3. Connect the lower connecting arms to the 3-point connecting plate pins 1 and secure
them with the safety pins included.
4. Set the tractor’s stabiliser to 100 mm of lateral movement.
5. Mount the top rod of your tractor and unscrew it until it has reached the same level as
the 3-point stop connection of the Verti-Groom.
6. Connect the top rod 3 with pin 2 to the frame. Secure pin 2 using the safety pin
included.
7. Screw the top rod 3 in to tension it.
!! Make sure that all mounting pins are securely locked!!
8. Slide adjustable leg 5 upwards and lock it with pin 6 and the appropriate safety pin.
9. Start the tractor and raise the Verti-Groom from the ground.
