11
2.1 Initial Adjustment of Speed Pedal
90 mm
2
1
BOTTOM VIEW
6
4
5
3
The speed pedal will be set at the factory, but is important for your own safety to check this
before starting the machine the first time.
Check as following:
-
Lift up the rear wheels of the unit and block securely (for 3-wheel drive version, lift all
wheels off ground).
-
Check height of the speed pedal (90 mm) if not, correct by making rod 5 longer or
shorter.
-
Check if the speed pedal will have free play, if so adjust item nr 2 so that you do not
have any free play left in the pedal.
-
Move the pedal a few times forward and backward, and check if it still comes back in
neutral position.
-
Start the engine and push the speedpedal complete forward. Release the pedal and it
should come back to neutral. If the wheels still move forward or backward in neutral,
you have to adjust rod nr 3.
-
If the wheels still move forward, shorten the rod nr 3.
-
If the wheels still move backwards make the rod a little longer.
When you have checked this, you can lower the machine onto the wheels and test drive.
