9
Verti-Cut
Figure 6
3.0 FIRST INSTALLATION OF THE VERTI-CUT
The machine is placed in the transport position on the pallet. To remove the pallet and to place
the machine horizontally on the ground, you take the following steps
(see Figure 6)
:
NEVER crawl under the machine!
1. Attach a cable to the lifting eye.
Make sure that the cable/crane/lift can hoist minimum twice the weight of
the machine. (See Chapter 1.0 ‘Technical Data’ for the weight details.)
2. Remove the transport straps (1).
3. Lift the machine off the pallet.
4. Pull the pallet from under the machine.
NEVER crawl under the machine!
5. Slowly lower the machine until it touches the ground.
6. Attach the machine to a tractor. (See Chapter 4.0 for instructions about attaching to the tractor.)
Use the proper tractor (please refer to the specifications).
Turn off the tractor and secure the tractor/Verti-Cut combination against
driving off and/or sliding off.