Redexim Verti-Core III 1600, Руководство пользователя и каталог запасных частей

Страница: 15 / 28

15
5.0 SETTING THE WORKING DEPTH
Fig.
10
The
wor
king
dept
h
can
be
set
whe
n
the
mac
hine
is
lifte
d off
the
grou
nd.
(see Fig.10)
The procedure is as follows:
!! Make sure the tractor/Verti-Core III are secured in place, and cannot start moving !!
!! Switch the tractor off prior to getting off !!
1. Unscrew the nuts (1) on both sides of the machine a few turns.
The machine comes with a set of spanners; you can find these in the tool case
(4).
2. Set the spindles (2) using the provided spanners, which will change the working depth.
Stickers (3) on the side of the machine indicate the depth setting on both sides of the
machine.
3. As soon as the right working depth has been achieved, you can tighten the nuts (1) on
both sides.
4. Check whether the setting is the same on both sides.
Never change the setting on one side by more than 4 turns. First compensate on the other side,
before proceeding.
! IMPORTANT!
Check the working depth first in a static situation on the ground before actually starting the
work!