Redexim Verti-Core III 1600, Руководство пользователя и каталог запасных частей

Страница: 13 / 28

13
4. Annual maintenance:
- Remove the PTO from the machine
- Inspect the PTO components. All damaged parts must be replaced.
- Disassemble the slip clutch by removing all spring assembly bolts/nuts; the slip clutch
should then fall apart.
- Lay all parts down and check them closely. Replace any damaged and worn parts.
- Clean all intermeshing parts.
- Reassemble all parts, and tighten the bolts and nuts so that the springs are set at 33 mm
(1.3”).
- Grease both sleeves and put both PTO parts back together.
- Reassemble the PTO and mount it on the machine.
- Adjust, if required, the springs of the slip clutch as described above.
The slip clutch only protects the machine against short periods of overload when it is set
correctly. Prolonged overload will damage the machine. The slip clutch will not protect the
machine against that. Be sure to avoid overload on your machine.
Please refer to the manual with the PTO for further information on PTO maintenance and
disassembly.
If the PTO is shortened incorrectly, or another tractor is used, the gearbox can be
subjected to excessive load. This can lead to damage to both the tractor and Verti-Core III!