15
10.0 TROUBLE SHOOTING (PROBLEM ANALYSIS)
Problem Possible
cause Solution
Spilling seed from the seed
container
Seed output opening is too
large.
There is a leak at the side of
the base plate of the sowing
slot.
Readjust the seed output
opening.
Tape up / glue together
Machine does not reach its
working depth.
Subsoil is too hard.
Too much felt in the top layer
of the field
Too little weight
Aerate / sprinkle
Remove the felt
Put extra weight
Squeaking noises during the
machine’s operation
Bearings are worn out.
Replace the bearings
Machine does not move.
V-belts are slipping.
V-belts are burnt.
Defect in the mechanical
drive line
Span the V-belts and/or adjust the
idler tension pulley.
Replace the V-belts.
Repair and/or replace the parts.
11.0 EU DECLARATION
The product
‘SPEEDSEED WALK BEHIND’ WITH A MACHINE NUMBER AS INDICATED ON THE
MACHINE AND INDICATED IN THIS MANUAL
to which this declaration refers, complies with stipulation of the 2006/42/EC machine
directive and is in conformity with the following standards: NEN-EN-ISO 12100 : 2010 NEN-
EN-ISO 13857 : 2008
Zeist, 27.12.2010
A.C. Bos
Manager Operations & Logistics
Redexim Holland
