14
5. Start the motor with a low number of revolutions.
(Please refer to the supplied manual for the start procedure of the motor.)
6. Operate the machine by pulling the handle for driving (1) towards the handle bar.
7. Push the accelerator handle (2) downwards; start with a speed of approx. 3 km/h (1.9
mph).
8. It is possible to increase the speed by pushing the accelerator handle further downwards.
!! Let the machine determine the speed. Do not push or slow down the machine
in order to avoid damage to the machine and/or lawn !!
STOPPING TO SOW
1.
Pull the accelerator handle (2) upwards and decrease the speed to approx. 3 km/h (1.9
mph).
2. Let go of the handle for driving (1). The drive is interrupted and the machine will stop.
3. Pull the accelerator handle (2) completely upwards so that the engine will run with low
revs.
4. Go to the next location and start again as described above. Or turn the engine off.
!! It is absolutely vital to work according to the aforementioned procedures !!
