Redexim Rink DS550SP, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 45

- 6 - DS550PB
1.0 BRIEF DESCRIPTION
The RINK DS550SP Disc Spreader is used for spreading small-grained materials, such as
sand, gravel and so on. The disc spreader of the conveyor belt is driven by a gear with a
hydraulic motor. The two disc spreaders are each driven by one hydraulic motor. The speed
sensor of the hydraulic motors for the conveyor belt and the disc spreaders are connected
through an adjustable flow regulator. The spreading material can therefore be accurately
regulated. Spreading width and rate can be determined by vehicle speed, spreading disc and
belt conveyor speed.
2.0 SPECIFICATIONS
RINK DS500PB Disc Spreader Dimensions
Length ........................................................................................ 3,000 mm
Width .......................................................................................... 1,400 mm
Height ......................................................................................... 1,700 mm
Maximum charge quantity ...................................................... 0.55 m
3
Weight
Permitted total weight ................................................................ 1,000 kg
Net weight .............................................................................. ... 590 kg
Spread width (adjustable) ........................................................ up to 12 m
Hydraulic connector values
Minimum oil flow ........................................................................ 25 l/min
Minimum oil pressure ................................................................. 140 bar
Tyre
pressure ............................................................................. 0.8 bar
Noise emissions *
(A-weighted measurement in
accordance ISO 4781 and
EN 13684: 2004 + A3: 2010) A-weighted emission sound pressure level L
pAd
measured in working position re. 20 µPa: 86 dB
Uncertainty
K
pA
: 2 dB
A-weighted sound power level measured in working
position
L
WAd
re. 1pW: 100 dB
Uncertainty K
WA:
2 dB
Emission of hand-arm vibration *
(Measurement according to EN
12069 and EN 13684: 2004 + A3:
2010) Hand-arm-Vibration a
hv
: 2.1 m/s
2
Uncertainty K: 0.2 m/s
2
*Remark: emission values for both sound and vibrations are determined under reference
conditions as described in EN 13684. In practice the emission (or better: the partial
exposure) maybe different due to specific conditions and circumstances. Emission data are
primarily intended for comparison between different machines and may be used as an
indication for partial exposure, but with limited validity.