Redexim Level-Spike 1700, Руководство оператора и каталог запасных частей

Страница: 9 / 18

9
4.0 WORKING DEPTH ADJUSTMENT
The rear roller is an option for the LEVEL-SPIKE 1700 & 2200, see chapter 12. In case the rear roller is
added, the depth can be regulated.
The working depth can be set by locking the rear roller supports 3 with pin 2 at a certain level. When
the machine is at 90 degrees behind the tractor, the depth D is maintained. The lock pin is a coarse
setting. The fine tuning can be done with the top link of the tractor. If the rear roller has to float, store
the lock pin 2 in hole 4.
@ The rear roller locking may ONLY be used when no Weight Transfer System or extra weights are
used. Otherwise serious damage may appear.
@ The rear roller may be locked for storage as well, however only when the roller rests ON the ground.
If that does not happen the machine may tip.
@ Use the 90 degrees setting always as the starting point.