REDEX KRPX+, Инструкции по установке и обслуживанию

Страница: 4 / 152

KRPX+ User manual Ref.: RX182/010
Version 01/2017 - English
This document must not be reproduced nor information therein disclosed without our authorization
Page 2 / 24
1 INTRODUCTION
The KRPX+ planetary gearbox will give you complete satisfaction if all of the following mounting,
operating & maintenance instructions are respected.
1.1 Warnings
WARNING! HANDLING OPERATIONS .
The KRPX+ unit can be handled by the main housing or, with lifting rings, by the pinion
tapped hole.
WARNING! LUBRICATION REQUIREMENTS.
The rack and the output gears must be lubricated before running the KRPX+. The KRPX+
is delivered WITHOUT OIL: refer to lubrication chapter in this manual to respect all
lubrication requirements.
Any damage due to incorrect lubrication will void the warranty.
1.2 Gearbox identification
Each unit can be identified through its identification plate and the serial number indicated on it. The serial
number must be given for any correspondence on a particular unit.
1.3 Long term storage
Each gearbox is delivered wrapped and greased for 1 month anti-corrosion protection. Gearboxes which
are not installed shortly after receipt should be stored in a dry atmosphere with temperature between 0°C
& 40°C. The unit must be filled completely with oil for storage.
Serial number
Drawing code
Designation
Shipment date
Reduction ratio
Backlash (if
needed)
861607
RX128460-12
KRPX4+R.31.3.H
NOV. 2016
31