REDEX KRPX+, Инструкции по установке и обслуживанию

Страница: 21 / 152

KRPX+ User manual Ref.: RX182/010
Version 01/2017 - English
This document must not be reproduced nor information therein disclosed without our authorization
Page 19 / 24
Coupling
Shaft adapter
5 MOTOR INSTALLATION
5.1 MF-type motor flange mounting (for right angle configurations KRPX+R and cylindrical
shafts)
Respect the following instructions to install the motor flange.
Clean the mounting surfaces to be fitted together i.e.: coupling, pilot diameter of the motor, the flange 1.
and the motor shaft.
Mount the coupling (with or without shaft adapter) onto the bevel box shaft. 2.
WARNING!
When the coupling bore is bigger than the diameters of the motor shaft or bevel box shaft, a
shaft adapter is supplied with the coupling. The groove of this adapter must be aligned with
the coupling split bore.
Place the coupling with respect of the distance A (see picture & table). 3.
Tighten the screw of the coupling on the bevel box side (at the adequate tightening torque: see table 4.
1).
Mount the MF flange and tighten its 4 fixing screws (“screws MF  Bevel box & torque” in table 1).
5.
Carefully slide the motor shaft into the coupling bore (with the shaft adapter if supplied) until the 6.
motor face sits in the pilot diameter bore of the MF flange.
Tighten the motor screws one after the other in several passes (see tightening torque in table 2). 7.
Tighten the other screw of the coupling (at the adequate tightening torque: see table 1). 8.
Table 1: screws and distance A
Size MF type
Screws MF --> Bevel
box & torque
Screws of the coupling
& torque
Dist. A (mm)
+/- 1mm
KRPX1+R
MF3N M8
– 41Nm
M10
– 50Nm
65
MF1N M5
– 10Nm
M8
– 40Nm
KRPX2+R
MF4 R M10
– 83 Nm
M12
– 120 Nm
79
MF4 N M10
– 83 Nm
M12
– 110 Nm
79
MF2 N M6
– 17 Nm
M10
– 50 Nm
60
KRPX3+R
MF3 N
M8
– 41 Nm
M10
– 50 Nm
60
MF3 R M12
– 110 Nm
KRPX4+R
MF4N
M10
– 83 Nm
M12
– 110 Nm
79
MF4R M12
– 120 Nm
KRPX5+R MF5N M12
– 145 Nm
M12
– 120 Nm
60
Screws MF --> Bevel box
Screws of
the motor
flange
MF
Screw of the
coupling
Distance A