Redback® Proudly Made In Australia
3
3.0 Rear Panel Connections
Fig 2
1
240V AC Input
Power is supplied via a 230V mains lead.
2
24V Auxiliary Outputs
These provide 24V DC at a maximum of 1 amp combined output current.
3
Low Battery and Mains Fail Contacts
Normally open contacts which close when a low battery condition occurs or when mains is no longer powering
the charger.
4
Battery Voltage Connection
This lead must be connected to the batteries via a separate cable to that which is connected to the bve
and battery -ve binding posts. This separate lead accurately measures the voltage present at the batteries.
5
Battery -ve Connection
This is connected to the negative terminal of the battery.
6
Load -ve Connections
These binding posts are for the negative connection of the load(s). A maximum load of 50 amps per set of load
terminals.
7
Load +ve Connections
These binding posts are for the positive connection of the load(s). A maximum load of 50 amps per set of load
terminals.
8
Battery Isolate/Reset
This breaker can be used as an isolator to quickly disengage the batteries without having to disconnect leads. It
also acts as a safe guard against short circuits in the battery leads or reverse polarity connection.
9
Bve Connection
This is connected to the positive terminal of the battery.
Model
A 4506
A4512
AC Fuse (M205)
5A
5A
RISK OF ELECTRIC SHOCK
OPEN BY QUALIFIED
PERSONNEL ONLY
!
CAUTION
Manufactured in Australia
By Altronic Distributors Pty. Ltd.
www.altronics.com.au
LOAD 2 (-VE)
LOAD 1 (+VE)
(max load current 50A)
LOAD 2 (+VE)
(max load current 50A)
BATTERY (-VE)
BATTERY (+VE)
240V AC
LOAD 1 (-VE)
Please Note:
Unit suitable for use with Sealed Lead Acid (SLA)
batteries only.
NOTE: Only use batteries of the same make and capacity.
24V SYSTEM ONLY
Battery
Isolate/reset
Separate cable to run to battery
for accurate voltage indication
.
THIS MUST BE
CONNECTED FOR
CORRECT OPERATION
Battery
Voltage
+ –
24V Auxilliary
Outputs
(Total maximum
Load = 1 Amp)
Out
1
Out
2
- +
- +
Mains
Fail
Low
Batt.
Contacts close
on Alarm
Conditions
7
1
2
5
6
3
WATERPROOF
100A
4
8
9