10
www.redbacklasers.com.au
3D3X
OPERATING INSTRUCTIONS cont.
Pulse Mode
Pulse mode allows the 3D3XR or 3D3XG to be used with a line receiver such
as the RedBack LLR705 or LLRMM30 and so allowing the laser to be used
outside for general site levelling, patios, decking etc.
To enable pulse mode first unlock the pendulum to power up the laser
then you press the top right function button once. The Pulse LED light will
indicate when pulse mode is enabled, to disable once again press the top
right function button.
To enable pulse mode when the laser is in manual mode first press the top
right function button to enter that mode then press the same button once
more to enable pulse. A third press of the same function button will power
down the laser level.
Содержание 360G
Страница 1: ......