RED KOMODO 6K ST, Руководство по эксплуатации

Страница: 132 / 163

POWER
ATTACHING THE BATTERIES
Insert at least one compatible battery (refer to Batteries ) in one of the two battery slots. Slide the battery until it clicks.
The camera can charge the batteries when they are attached to the camera and the DC power Adaptor is connected.
The camera charges the batteries only when the camera is off and the power Adaptor is connected. Recharging two
batteries takes approximately eight hours, depending on the battery capacity. While the batteries are charging the DC
Power LED will blink amber.
REMOVING THE BATTERIES
You can hot swap a dead battery when you have another charged battery attached, and you can continue recording
while you make the swap.
1. While holding the attached battery, press the Eject Button .
2. Slide and lift the battery out.
POWER COMPONENTS
You can power the KOMODO camera with the RED KOMODO Power Adaptor , an External DC Power Source, or with
the rear-mounted Batteries .
For information about charging, storing, or maintaining the batteries, refer to the manufacturer's instructions.
COPYR IGHT © 2 0 2 0 R E D.COM , LLC 9 5 5 -0 1 9 0 , R E V -B E TA 1 .0 | 1 2 4
KOMODO OPERATION GUIDE BETA