Red Sound System DarkStar Vocoda Скачать руководство пользователя | Manualshive

Страница: 12 / 24

background image

MENU 4 - ‘S’ Spectrum [S SP]:

MENU 5 - Filter Mod [FILt]:

MENU 6 - Filter Mod Source [Src ]:

Envelope1 -
Envelope 2 -
LFO1 -
LFO2 -

This function sets the frequency of the ‘S’ detector when [VOCODER],

[INTERNAL OSCILLATOR] and [SYNTHESIZER] modes are selected (not active in other modes). Adjusting the
frequency of the noise source changes the timbre of the ‘S’ detector and overall vocoder sound. With the forth
menu selected the main display will alternate as follows:

RANGE = 0(low) to 15(high)

This setting will be applied to the selected mode. Use the menu [EDIT VALUE + and VALUE - ] buttons to change
the setting as follows:

This function allows you to apply Filter modulation to the oscillators or external sound

source. You can process any musical instrument through the filter section, even non-MIDI instruments such as
guitar, electric bass etc when the trigger mode in [PORTA/TRIGGER] menu is set to [AUDIO] - see page 21/22 for
full details.

RANGE = +7 to -7 (the center ‘0’ setting = OFF)

This function allows you to control the Filter modulation from one of four

sources as follows:

The settings of envelope 1 controls will affect the filter modulation.
The settings of envelope 2 controls will affect the filter modulation.

The settings of the LFO1 controls will affect the filter modulation.

The settings of the LFO2 controls will affect the filter modulation.

This control has two functions determined by the [SHIFT] button.

When the [SHIFT] function is

(SHIFT LED Off) this control sets the speed of the sequence. At the

fully anti-clockwise position the speed will be at its slowest. As the knob is moved in a clockwise direction the speed
gradually increases until, at the fully clockwise position the sequence rate will be at its maximum.

When the [SHIFT] function is selected (SHIFT LED Flashing) this control is used to synchronise the sequencer
with an external MIDI clock. The trigger rate can be set to a range of values from 1/8th beat to 4 bars in duration. At
the fully anti-clockwise position the MIDI synchronization feature will be OFF. The first setting is 1/8 beat which will
trigger the complete 8 step sequence every beat of the bar. As the knob is moved in a clockwise direction the
trigger rate becomes less frequent until, at the fully clockwise position each sequence event will last 4 bars,
completing its 8 event cycle in 32 bars.

NOTE: The following controls are only active in [SEQUENCE-CODER] and [SYNTHESIZER] modes. Additionally,
the two [SEQUENCE SOUND] control knobs are only activated in these modes whilst recording sequences.

NOT selected

,

,

SPEED

(MIDI CLOCK)

12

OPERATION

PARAMETER

VALUE

PARAMETER

VALUE

Setting = +3

Function = ‘S’ SPECTRUM

BANK

BANK

PROG

PROG

Display alternates

between

PARAMETER

VALUE

New setting = +2

BANK

PROG

DOWN

MENU

VALUE

VALUE

MENU

UP

OSCILLATORS

EDIT

Press the [VALUE+]
and [VALUE -] buttons
to change the setting

DarkStar Vocoda

«
...
10
11
12
13
14
...
»

Содержание DarkStar Vocoda

























Отзывы:

Нет отзывов

Похожие инструкции для DarkStar Vocoda

Бренд: Cirrus Logic Страницы: 26

Бренд: Yamaha Страницы: 53

Бренд: EFM Страницы: 4

Бренд: EFM Страницы: 8

Бренд: Waldorf Страницы: 231

Бренд: Starling Technologies Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды