*All authorized users must be using the same security password after this has been initially set. If you forget this,
hold RESET to restore the Smart Control into its default. If multiple Smart phones are being used the most
recent one to change the settings will have their programming entered into the system.
6. Controlling your system using Smart Phone Application (App)
System control page
Every instruction is sent via a text message. A text message acknowledgement corresponding to every
instruction will be sent in response. For a detailed description of the keys press ‘i’.
Inquire page
• You can check the settings of your GSM Smart Control and ensure that everything is in order by pressing
CHECK SETUP on the INQUIRE page. A text message response will list telephone numbers, dialing cycles as
well as the power status of any associated Smart Panel.
• After every CHECK SETUP command the associated device will enter HOME mode which allows for a
combination of ARM and ALERT pre-assigned zones. You may need to send a command for the desired
operating mode of your system after the inquiry.
Activation of the Alarm
Upon activation of the alarm the Smart Control will send a text message followed by a call to the first two
recipients. When a recipient picks up they will hear the recording and will then be able to listen in through the
microphone. If nobody picks up the Smart Control may make repeated attempts corresponding to the number of
dialing cycles set. After all attempts have been made the next recipient will be dialed. After the last recipient is
called the Smart Control will resume with the first recipient until the system is deactivated. This can only be
achieved by the user sending an SMS to the Smart Control or by disconnecting all power sources from the
Smart Control.
