RED ROOSTER TMH-12000/4-LF, Руководство пользователя

Страница: 6 / 60

6
USER MANUAL
▪ Red Rooster Lifting Limited ▪ Nauta House, The Meadows, Oldmeldrum, Aberdeenshire, AB51 0EZ ▪ Tel: +44 (0) 1651 872101 ▪ M01-AH14-LF REV0
GETTING STARTED - OPERATION
1.2 OPERATION
Red Rooster pneumatic hoists are designed for the lifting and lowering of loads within the capacity of the selected hoist model. Our ranges of
hoists are all ‘CE’ marked and conform with the Machinery Directive 2006/42/EC and the powered hoist standard BS EN 14492-2
Our range of hoists are available as hook suspension units, trolley mounted, built into low headroom units and cranes. Nearly all hoist models
are also available as ATEX ZONE 1 or 2 hoists for use in hazardous areas, with corrosion protection, and can work in temperatures of
-20 ° C to +60 ° C. When used outdoor or offshore hoists should be protected against the weather and examination and maintenance interval should
be reduced.
Our hoists are extremely robust being developed over many years in the harshest of environments and will require little maintenance if kept
lubricated on a regular basis. Noise levels can be found in the technical specification. In certain circumstances and temperatures there is a
danger of icing of the motor and exhaust silencer. This can be prevented by fitting a dryer to the air supply to remove moisture from the air supply.
CAUTION CAUTION