RED RANGER MONSTRO 8K VV, Руководство по эксплуатации

Страница: 74 / 213

OUTPUT SHARPNESS
Control the sharpness of each monitor output. Move to the left for a sharper image; move to the right for a less sharp
image.
NOTE: The sharpness setting affects the Histogram, RAW Level Bars, RAW Clip Meter, and false color modes. For
more information, go to "Histogram" on page 53 and "False Color Modes" on the next page .
NOTE: The camera applies the sharpness setting to recorded proxy files.
AUTO FOCUS PEAKING
When Auto Focus Peaking mode is enabled (either Focus or Edge), the camera automatically goes onto Focus
Peaking mode when you manually adjust the focus via the lens.
Off : The camera does not automatically go into Focus Peaking mode.
Focus : The camera automatically goes into Focus Peaking mode when you manually adjust the focus via the lens.
Emphasizes contrast and edges in the image without changing brightness or image content making it easier to
judge focus.
Edge : The camera automatically goes into Focus Peaking mode when you manually adjust the focus via the lens.
Shows the edges/outlines of objects that are in focus.
TOUCH
Lock Touchscreen : Touchscreen control is locked. To unlock, tap the screen and follow the on-screen
instructions.
Pinch to Magnify : Move two (2) fingers apart or together to toggle Magnify. For more information, go to "Display
Modes: Magnify" on page 77 .
Double Tap Right to Record : Double-tap the right 25% of the video area on the LCD to toggle record.
Double Tap Left to AF : Double-tap the left 25% of the video area on the LCD to start autofocus when compatible
lenses are used.
GENLOCK OFFSET
Offset the video of the HD-SDI out to align it with the genlock signal:
Negative offset : Advances the video, so the video reaches the switcher earlier than it would otherwise.
Positive offset : Delays the video, so the video reaches the switcher later than it would otherwise.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D | 7 4
RED RANGER OPERATION GUIDE