Red Panda CONTEXT 2, Руководство пользователя

Страница: 18 / 37

18
Tap Tempo
You can set independent note divisions for delay time, reverb pre-delay, and tremolo rate. The tap divi-
sions are stored in presets, and delay note division set via the mode knob is remembered when power is
removed.
The CTRL port supports external tap tempo switches that use a normally open contact, including
multi-output tap controllers. Some remote switch modes also provide a tap tempo switch. Tap the
switch at quarter note intervals to set the delay time using tap tempo. The LED will blink yellow to indi-
cate the current tempo. To cancel tap tempo, quickly double tap the left (
TAP) footswitch.
Adjusting a knob will disable tap tempo for that parameter. To re-enable tap tempo, set the interval
again or reload the preset.
If you need to synchronize multiple tap-tempo pedals, you can use a multiple output tap controller, USB,
or 1/4" TRS MIDI.
To set delay tap divisions, hold the
SHIFT button and rotate the mode knob. More note divisions are
available via MIDI or using our web editor.
By default, the delay time is set for quarter notes and tap divisions are off for other parameters.
Delay note divisions (MODE knob)
Mode Note Division
ROOM Off
HALL Half note
CATH Dotted quarter note
GATE Quarter note
REV Quarter note triplet
PLATE Dotted eight note
SPRING Eighth note
GRAIN Eighth note triplet