NT24k Compact Series - Hardware Manual (Revised 06-02-2015)
90
NTCD-CFG Configuration Device
2.8
NTCD-CFG Configuration Device
Note:
•
Do not use, connect, or disconnect unless the area is known to be non-hazardous. Connection or disconnection in
an explosive atmosphere could result in an explosion.
•
Ne pas utiliser, de connecter ou déconnecter sauf si la zone est connue pour être non dangereuse. Connexion ou
la déconnexion dans une atmosphère explosive pourrait entraîner une explosion.
2.9
USB Interface
The NT24k switches provide a USB interface accessed via the USB connector labeled as “USB” on the top of the compact
models. The USB connection is used to access the Command Line Interpreter (CLI) or PPP (Point-to-Point Protocol).
USB Cable
Connect the USB port of your PC and the Switch using a standard USB cable. A cable with a Type A connector for the PC
end, and a Type B connector for the switch end must be used.
Standard USB cables are readily available from a variety of computer stores.
NTCD-CFG
Configuration Device
Ideal for saving or restoring switch configuration parameters quickly without the need for a
computer or software. One configuration device per switch is recommended.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]