R
EVISED
2018-09-21
P
ORTS
D
RAWING
N
O
. LP0991-G
P
O
E
N-Tron
®
Series NT24K
®
Software Manual
2-77
Mirrored Data Only:
Select the mirrored data to be transmitted to the destination port.
Tx Source Ports:
Select the transmitting ports to be mirrored by checking on the desired ports or the
Select All
button.
Rx Source Ports:
Select the receiving ports to be mirrored by checking on the desired ports or the
Select All
button.
Configuration Notes:
1. Non-mirrored frames take priority over mirrored frames. Mirrored frames may be discarded under rare
instances when resource contention occurs.
2. The mirroring destination port is not allowed to overlap with the following features. Care should be taken to
avoid configuration conflicts: N-Ring, N-Link, Trunking.
Click on the
Update
button. To save the changes made, navigate to the
Configuration
menu and click on the
Save
button.
2.21.3
PoE
PoE (Power Over Ethernet) is an internal hardware capability that outputs power and data on Ethernet cabling to
Powered Devices (PDs) such as VoIP phones, IP camera, and industrial devices. PoE eliminates the need to run
separate data and power cables between the PSE (PoE Source Equipment) and the PoE powered device.
PoE Management on the NT24k provides the ability to set the PoE power budget, enable/disable PoE on specific
ports, and set power limits per port.
Note:
PoE is only supported on certain NT24k switches.
