red lion N-Tron Series Скачать руководство пользователя страница 53

Страница: 53 / 146

OFTWARE

ONFIGURATION

EVISED

2018-09-21

DHCP S

ERVER

ONFIGURATION

RAWING

. LP0991-G

2-44

N-Tron

Series NT24K

Software Manual

2.15.2

DHCP

Server

Scope

Configuration

Scope

Configuration

Pools

The DHCP Server Scope Configuration contains vital network configuration options, called scope configuration
pools, for potential clients. At least one scope configuration pool is necessary to create static assignments.

View

Page

Modify

Page

On the Modify page, the last column contains various buttons. The

Remove

button removes the corresponding

scope configuration pool along with all static assignment and bindings associated with the pool. The

Add

button is

used to add a new scope configuration pool.

Click on the

Add

button to add the new scope.

Click on the

Remove

button to remove an existing or new scope.

Click on the

Update

button to apply the changes.

Enabled:

Indicates whether the pool is enabled or disabled.

Pool Name:

Descriptive name of the scope configuration pool. This field is required and must be unique.

Pool Range:

Starting and ending IP addresses for the pool of addresses.

Subnet Mask:

The subnet mask for the IP address pool.

Gateway:

The gateway IP address offered to the client. This field is optional.

Domain:

The domain name offered to the client. This field is optional.

DNS:

The DNS server IP addresses offered to the client. These fields are optional.

Lease Duration:

The lease time (in days, hours and minutes) offered to the client. The range is 1 minute to

1000 days. The default is 28 days. If the Forever checkbox is checked, the lease does not expire.

Содержание N-Tron Series



















































































































































Результаты поиска

Содержание N-Tron Series

Отзывы:

Похожие инструкции для N-Tron Series

Бренды по названию

Популярные бренды

red lion N-Tron Series, Руководство пользователя программного обеспечения

Результаты поиска

Содержание N-Tron Series

Отзывы:

Похожие инструкции для N-Tron Series

Бренды по названию

Популярные бренды