Red Jacket Quick-Set AGUMP150S1 Скачать руководство пользователя страница 4

1

  Introduction

Red Jacket 4-inch diameter non-CPT UMPs are interchangeable except that the lengths vary dependent upon the 
model and inlet area. When changing the model of the installed UMP, be sure to check the length (ref. Table 5/
Figure 1) so that proper clearance off the tank bottom is maintained (4 to 5” [100 to 125mm] for standard and 
TRAPPER™ UMPs and 14” [355mm] for UMPs with a floating suction adapter.)

Red Jacket CPT UMP models (UMP200U20-2 and AGUMP20T20-2) can only replace non-CPT models if the 
entire system is upgraded to include the VSFC controller and PLLD pressure transducer.

Safety Precautions

The following safety symbols are used throughout this manual to alert you to important safety hazards and 
precautions.

EXPLOSIVE

Fuels and their vapors are extremely explosive if 
ignited.

FLAMMABLE

Fuels and their vapors are extremely flammable.

ELECTRICITY

High voltage exists in, and is supplied to, the device. 
A potential shock hazard exists.

TURN POWER OFF

Live power to a device creates a potential shock 
hazard. Turn Off power to the device and associ-
ated accessories when servicing the unit.

WARNING

 

indicates a hazardous situation 

which, if not avoided, could result in death or 
serious injury.

CAUTION

 

indicates a hazardous situation 

which, if not avoided, could result in minor or 
moderate injury.

WEAR EYE PROTECTION

Wear eye protection when working with pressurized 
fuel lines to avoid possible eye injury.

NOTICE

 is used to address practices not 

related to physical injury.

WEAR GLOVES

Wear gloves to protect hands from irritation or injury.

NO POWER TOOLS

Sparks from power tools (such as drills) can 
ignite fuels and their vapors.

NO SMOKING

Sparks and embers from burning cigarettes or pipes 
can ignite fuels and their vapors.

NO OPEN FLAMES

Open flames from matches, lighters, welding 
torches, etc. can ignite fuels and their vapors.

READ ALL RELATED MANUALS

Knowledge of all related procedures before you 
begin work is important. Read and understand all 
manuals thoroughly. If you do not understand a pro-
cedure, ask someone who does

TURN OFF CELL PHONES/PAGERS

Sparks from electronic devices in the vicinity of 
gasoline storage tanks could cause an explosion 
or fire resulting in bodily injury or death.

OFF

WARNING

CAUTION

NOTICE

Содержание Quick-Set AGUMP150S1




















Отзывы: