Red Hat GLOBAL FILE SYSTEM 5.2, Руководство пользователя

Страница: 37 / 58

7. Adding Journals to a File System
The
gfs_jadd
command is used to add journals to a GFS file system after the device where the
file system resides has been expanded. Running a
gfs_jadd
command on a GFS file system
uses space between the current end of the file system and the end of the device where the file
system resides. When the fill operation is completed, the journal index is updated.
The
gfs_jadd
command must be run on mounted file system, but it only needs to be run on one
node in the cluster. All the other nodes sense that the expansion has occurred.
To verify that the changes were successful, use the
gfs_jadd
command with the
-T
(test) and
-v
(verbose) flags. Running the command with those flags displays the current state of the
mounted GFS file system.
Usage
gfs_jadd -j Number MountPoint
Number
Specifies the number of new journals to be added.
MountPoint
Specifies the directory where the GFS file system is mounted.
Comments
Before running the
gfs_jadd
command:
• Back up important data on the file system.
• Run a
df MountPoint
command to display the volume used by the file system where
journals will be added.
• Expand the underlying cluster volume with LVM. For information on administering LVM
volumes, see the LVM Administrator's Guide
You can find out how many journals are currently used by the filesystem with the
gfs_tool df
MountPoint
command. In the following example, the file system mounted at
/mnt/gfs
uses 8
journals.
[root@tng3-1 gfs]# gfs_tool df /mnt/gfs
/mnt/gfs:
SB lock proto = "lock_dlm"
SB lock table = "tng3-cluster:mydata1"
SB ondisk format = 1309
Usage
27