Red Hat GFS 6.0 - Скачать руководство пользователя страница 107

Страница: 107 / 192

Chapter 9. Managing GFS

Option

Description

-o

acl

Allows manipulating file ACLs. If a file system is

mounted without the

-o

acl

mount option, users are

allowed to view ACLs (with

getfacl

), but are not

allowed to set them (with

setfacl

hostdata=

nodename

LOCK_GULM file systems use this information to set

the local node name, overriding the usual selection of

node name from

uname -n

lockproto=

LockModuleName

Allows the user to specify which locking protocol to

use with the file system. If

LockModuleName

is not

specified, the locking protocol name is read from the

file system superblock.

locktable=

LockTableName

Allows the user to specify which locking table to use

with the file system.

upgrade

Upgrade the on-disk format of the file system so that

it can be used by newer versions of GFS.

ignore_local_fs

Caution:

This option should

not

be used

when GFS file systems are shared.

Forces GFS to treat the file system as a multihost file

system. By default, using LOCK_NOLOCK

automatically turns on the

localcaching

and

localflocks

flags.

localcaching

Caution:

This option should

not

be used

when GFS file systems are shared.

Tells GFS that it is running as a local file system. GFS

can then turn on selected optimization capabilities

that are not available when running in cluster mode.

The

localcaching

flag is automatically turned on

by LOCK_NOLOCK.

localflocks

Caution:

This option should not be used

when GFS file systems are shared.

Tells GFS to let the VFS (virtual file system) layer do

all flock and fcntl. The

localflocks

flag is

automatically turned on by LOCK_NOLOCK.

Table 9-2. GFS-Specific Mount Options

9.3. Unmounting a File System

The GFS file system can be unmounted the same way as any Linux file system.

Note

The

umount

command is a Linux system command. Information about this command can be found in

the Linux

umount

command man pages.

Содержание GFS 6.0 -

































































































































































































Результаты поиска

Содержание GFS 6.0 -

Отзывы:

Похожие инструкции для GFS 6.0 -

Бренды по названию

Популярные бренды

Red Hat GFS 6.0 -, Руководство администратора

Результаты поиска

Содержание GFS 6.0 -

Отзывы:

Похожие инструкции для GFS 6.0 -

Бренды по названию

Популярные бренды