Red Hat GFS 6.0 - Скачать руководство пользователя страница 145

Страница: 145 / 192

Appendix A.

Using Red Hat GFS with Red Hat Cluster Suite

This appendix provides information about considerations to take when running Red Hat GFS 6.0 with

Red Hat Cluster Suite and consists of the following sections:

•

Section A.1

Terminology

•

Section A.2

Changes to Red Hat Cluster

•

Section A.3

Installation Scenarios

A.1. Terminology

You may have encountered new terms associated with Red Hat Cluster Suite. The following list pro-

vides a brief description of terms used with Red Hat GFS and Red Hat Cluster Suite:

GFS Setup Druid

This application is a Red Hat Cluster GUI for initial configuration of Red Hat GFS. The GUI is

launched separately from the Red Hat Cluster GUI, the

Cluster Configuration Tool

. The

GFS

Setup Druid

uses

/etc/cluster.xml

as input. If

/etc/cluster.xml

does not exist, the

GFS Setup Druid

displays a message and exits.

Note

You must run the

Cluster Configuration Tool

before running the

GFS Setup Druid

; the

Cluster

Configuration Tool

creates

/etc/cluster.xml

To run the

GFS Setup Druid

, enter the following at the command line:

redhat-config-gfscluster

gulm-bridge

This is a fence method available for Red Hat Cluster nodes,

and

only if

the Red Hat GFS RPM

is installed on the node that the

Cluster Configuration Tool

runs on. The gulm-bridge fence

method has been added to Red Hat Cluster Suite specifically for the Red Hat Enterprise Linux

Update 3 release. Using this fence method on a Red Hat Cluster Manager member prevents it

from being fenced twice.

Red Hat Cluster

Red Hat Cluster Manager is part of the Red Hat Cluster Suite. It provides cluster administration

functionality for Red Hat Enterprise Linux

Red Hat Cluster Manager contains two major

components:

•

Red Hat Cluster Manager

— The underlying software (non-GUI) that performs Red Hat

Cluster administrations services.

•

Cluster Configuration Tool

— This component is the graphical user interface (GUI) for Red

Hat Cluster Manager. The GUI provides a configuration interface and a status monitor for

members and services in a Red Hat Cluster Manager system. The

Cluster Configuration

Tool

accepts configuration data from a user and writes it to the

/etc/cluster.xml

file. The

Red Hat Cluster Manager

reads the configuration data from the

/etc/cluster.xml

file.

Содержание GFS 6.0 -

































































































































































































Результаты поиска

Содержание GFS 6.0 -

Отзывы:

Похожие инструкции для GFS 6.0 -

Бренды по названию

Популярные бренды

Red Hat GFS 6.0 -, Руководство администратора

Результаты поиска

Содержание GFS 6.0 -

Отзывы:

Похожие инструкции для GFS 6.0 -

Бренды по названию

Популярные бренды