Red Hat GFS 6.0 - Скачать руководство пользователя страница 37

Страница: 37 / 192

Chapter 5. Using the Pool Volume Manager

Flag

Option

-q

Be quiet. Do not display output from the command.

-V

Display command version information, then exit.

-v

Verbose operation.

Table 5-2.

pool_tool

Command Options

5.2.2.

pool_assemble

The

pool_assemble

command activates and deactivates pools on a system (refer to Table 5-3 and

Table 5-4). One or more pool names can be specified on the command line, indicating the pools to be

activated or deactivated. If no pools are specified on the command line, all pools will be acted upon.

Flag

Function

Section/Page Reference

-a

Activate pool(s)

Section 5.6

Activating/Deactivating a Pool Volume

-r

Deactivate pool(s)

Section 5.6

Activating/Deactivating a Pool Volume

Table 5-3.

pool_assemble

Command Functions

Flag

Option

-D

Enable debugging output.

-h

Help. Show usage information.

-q

Be quiet. Do not display output from the command.

-V

Display command version information, then exit.

-v

Verbose operation.

Table 5-4.

pool_assemble

Command Options

5.2.3.

pool_info

The

pool_info

command scans disks directly and displays information about activated pools in

a system; that is, pools that have been assembled with the

pool_assemble

command (refer to

Table 5-5 and Table 5-6). Information about pools that are present but not assembled is excluded from

the information displayed with a

pool_info

command. One or more pool names can be specified on

the command line to select information about specific pools. If no pool name is specified, information

on all pools is returned.

Flag

Function

Section/Page Reference

-c

Clear statistics

Section 5.13

Using Pool Volume Statistics

Содержание GFS 6.0 -

































































































































































































Результаты поиска

Содержание GFS 6.0 -

Отзывы:

Похожие инструкции для GFS 6.0 -

Бренды по названию

Популярные бренды

Red Hat GFS 6.0 -, Руководство администратора

Результаты поиска

Содержание GFS 6.0 -

Отзывы:

Похожие инструкции для GFS 6.0 -

Бренды по названию

Популярные бренды