Red Hat DIRECTORY SERVER 7.1 Скачать руководство пользователя страница 91

Страница: 91 / 96

Glossary

SSL

Also Secure Sockets Layer. A software library establishing a secure connection between two

parties (client and server) used to implement HTTPS, the secure version of HTTP.

standard index

index maintained by default.

sub suffix

A branch underneath a root suffix.

subagent

See

SNMP subagent

substring index

Allows for efficient searching against substrings within entries. Substring indexes are limited to

a minimum of two characters for each entry.

suffix

The name of the entry at the top of the directory tree, below which data is stored. Multiple suffixes

are possible within the same directory. Each database only has one suffix.

superuser

The most privileged user available on UNIX machines. The superuser has complete access priv-

ileges to all files on the machine. Also called root.

supplier

Server containing the master copy of directory trees or subtrees that are replicated to consumer

servers.

supplier server

In the context of replication, a server that holds a replica that is copied to a different server is

called a supplier for that replica.

supplier-initiated replication

Replication configuration where

supplier

servers replicate directory data to consumer servers.

Содержание DIRECTORY SERVER 7.1

































































































Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Red Hat DIRECTORY SERVER 7.1, Руководство по установке, Страница: 91 / 96

Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы: