Red Hat DIRECTORY SERVER 7.1 Скачать руководство пользователя страница 63

Страница: 63 / 96

Chapter 6. Migrating from Previous Versions

6.4.1. Before You Begin

Before you begin the upgrade process, back up your entire 7.0 Directory Server. For instructions,

check

backing up

and

exporting

in "Populating Directory Databases" in the

Red Hat Directory Server

Administration Guide

6.4.2. Upgrading

The steps below show how to perform an upgrade using Typical installation:

1. On your Directory Server 7.0 host machine, log in as root or superuser (su).
2. Stop the server.

serverRoot

/slapd-

serverID

/stop-server

3. Create a new directory for the new 7.1 Directory Server. For example:

mkdir ds71

cd ds71

4. Download the Directory Server product binaries file to the directory you created.
5. Unpack the product binaries file using the following command:

gunzip -dc

filename

.tar.gz | tar -xvof -

where

filename

corresponds to the product binaries that you want to unpack.

6. In the list of files, locate the setup program.
7. Run the setup program by issuing the following command from the installation directory:

./setup

The setup program asks if you would like to proceed with the setup.

8. Press [Enter] to respond with the default (the default for this prompt is

Yes

) or press

if you

would like to exit the setup program.

9. Next, the setup program asks you if you agree to the license terms. Press

to agree with the

license terms.

10. When you are asked what you would like to install, press

Enter

to select the default, Red Hat

Servers.

11. When you are asked what type of installation you would like to perform, press

Enter

to select

the default,

Typical Installation

12. When prompted to enter the server root (or the installation directory), enter the full path to the

location where your Directory Server 7.0 is installed.
By default, the setup program provides the following path:

/opt/redhat-ds/servers

If your 7.0 Directory Server is installed in a different path, be sure to select that path. Once you

supply the correct path, press [Enter].

13. The setup program starts upgrading your server. Follow the prompts, and complete the upgrade

process.

6.4.3. After You Upgrade

To verify that the upgrade process was successful, check the upgraded server for data consistency and

any custom schema.

Содержание DIRECTORY SERVER 7.1

































































































Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Похожие инструкции для DIRECTORY SERVER 7.1

Бренды по названию

Популярные бренды

Red Hat DIRECTORY SERVER 7.1, Руководство по установке

Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Похожие инструкции для DIRECTORY SERVER 7.1

Бренды по названию

Популярные бренды