Red Hat DIRECTORY SERVER 7.1 Скачать руководство пользователя страница 43

Страница: 43 / 96

Chapter 4. Silent Installation and Instance Creation

Directive

Description

Components

Specifies components to be installed. The list of available components

differs depending on the servers available on your installation media.

For stand-alone directory installation, the list of components is:

svrcore

- Uninstallation binaries

base

- The base installation package

admin

- The Administration Server binaries

slapd

- The Directory Server binaries

This directive is required. At a minimum, you should always provide

components=svrcore,base,admin

ServerRoot

Specifies the full path to the directory where the Directory Server

binaries are installed. This directive is required.

FullMachineName

Specifies the fully qualified domain name of the machine on which

you are installing the server. The default is the local host name.

SuiteSpotUserID

Specifies the user name the servers run as. This parameter does not

apply to the user as which the Administration Server runs. See the

SysUser

directive in Table 4-4 for more information. The default is

user

nobody

, but this should be changed for most deployments.

SuiteSpotGroup

Specifies the group the servers run as. The default is group nobody, but

this should be changed for most deployments.

ConfigDirectoryLdapURL

Specifies the LDAP URL that is used to connect to your configuration

directory. LDAP URLs are described in the

Red Hat Directory Server

Administration Guide

. This directive is required.

AdminDomain

Specifies the administration domain that this server is registered under.

Refer to Section 1.2.8

Determining the Administration Domain

for

more information about administration domains.

ConfigDirectoryAdminID

Specifies the user ID of the entry that has administration privileges to

the configuration directory. This directive is required.

ConfigDirectoryAdminPwd

Specifies the password for the

ConfigDirectoryAdminID

. This

directive is required.

UserDirectoryLdapURL

Specifies the LDAP URL that is used to connect to the directory where

your user and group data are stored. If this directive is not supplied, the

configuration directory is used for this purpose. LDAP URLs are

described in the

^Red Hat Directory Server Administration Guide

UserDirectoryAdminID

Specifies the user ID of the entry that has administration privileges to

the user directory.

UserDirectoryAdminPwd

Specifies the password for the

UserDirectoryAdminID

Table 4-1.

[General]

Installation Directives

4.1.3.3.

[slapd]

Installation Directives

[slapd]

installation directives specify information of interest only to the Directory Server instance

that you are currently installing. These directives are classified as follows:

Содержание DIRECTORY SERVER 7.1

































































































Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Похожие инструкции для DIRECTORY SERVER 7.1

Бренды по названию

Популярные бренды

Red Hat DIRECTORY SERVER 7.1, Руководство по установке

Результаты поиска

Содержание DIRECTORY SERVER 7.1

Отзывы:

Похожие инструкции для DIRECTORY SERVER 7.1

Бренды по названию

Популярные бренды