Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Скачать руководство пользователя страница 30

Страница: 30 / 78

Figure 1.13. GFS and GNBD with Directly Connected Storage

6. Cluster Logical Volume Manager

The Cluster Logical Volume Manager (CLVM) provides a cluster-wide version of LVM2. CLVM

provides the same capabilities as LVM2 on a single node, but makes the volumes available to

all nodes in a Red Hat cluster. The logical volumes created with CLVM make logical volumes

available to all nodes in a cluster.

The key component in CLVM is

clvmd

is a daemon that provides clustering extensions

to the standard LVM2 tool set and allows LVM2 commands to manage shared storage.

clvmd

runs in each cluster node and distributes LVM metadata updates in a cluster, thereby

presenting each cluster node with the same view of the logical volumes (refer to

Figure 1.14,

“CLVM Overview”

). Logical volumes created with CLVM on shared storage are visible to all

nodes that have access to the shared storage. CLVM allows a user to configure logical volumes

on shared storage by locking access to physical storage while a logical volume is being

configured. CLVM uses the lock-management service provided by the cluster infrastructure

(refer to

Section 3, “Cluster Infrastructure”

Note

Chapter 1. Red Hat Cluster Suite Overview

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 5.2















































































Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Бренды по названию

Популярные бренды

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2, Обзор

Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Бренды по названию

Популярные бренды