Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Скачать руководство пользователя страница 24

Страница: 24 / 78

High-availability service management provides the ability to create and manage high-availability

cluster services in a Red Hat cluster. The key component for high-availability service

management in a Red Hat cluster,

rgmanager

, implements cold failover for off-the-shelf

applications. In a Red Hat cluster, an application is configured with other cluster resources to

form a high-availability cluster service. A high-availability cluster service can fail over from one

cluster node to another with no apparent interruption to cluster clients. Cluster-service failover

can occur if a cluster node fails or if a cluster system administrator moves the service from one

cluster node to another (for example, for a planned outage of a cluster node).

To create a high-availability service, you must configure it in the cluster configuration file. A

cluster service comprises cluster resources. Cluster resources are building blocks that you

create and manage in the cluster configuration file — for example, an IP address, an application

initialization script, or a Red Hat GFS shared partition.

You can associate a cluster service with a failover domain. A failover domain is a subset of

cluster nodes that are eligible to run a particular cluster service (refer to

Figure 1.9, “Failover

Domains”

Note

Failover domains are not required for operation.

A cluster service can run on only one cluster node at a time to maintain data integrity. You can

specify failover priority in a failover domain. Specifying failover priority consists of assigning a

priority level to each node in a failover domain. The priority level determines the failover order —

determining which node that a cluster service should fail over to. If you do not specify failover

priority, a cluster service can fail over to any node in its failover domain. Also, you can specify if

a cluster service is restricted to run only on nodes of its associated failover domain. (When

associated with an unrestricted failover domain, a cluster service can start on any cluster node

in the event no member of the failover domain is available.)

Figure 1.9, “Failover Domains”

, Failover Domain 1 is configured to restrict failover within that

domain; therefore, Cluster Service X can only fail over between Node A and Node B. Failover

Domain 2 is also configured to restrict failover with its domain; additionally, it is configured for

failover priority. Failover Domain 2 priority is configured with Node C as priority 1, Node B as

priority 2, and Node D as priority 3. If Node C fails, Cluster Service Y fails over to Node B next.

If it cannot fail over to Node B, it tries failing over to Node D. Failover Domain 3 is configured

with no priority and no restrictions. If the node that Cluster Service Z is running on fails, Cluster

Service Z tries failing over to one of the nodes in Failover Domain 3. However, if none of those

nodes is available, Cluster Service Z can fail over to any node in the cluster.

Chapter 1. Red Hat Cluster Suite Overview

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 5.2















































































Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Бренды по названию

Популярные бренды

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2, Обзор

Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Бренды по названию

Популярные бренды