Red-D-Arc D502K 5+4, Техническое руководство

Страница: 57 / 82

TM-4412 Page 53 D502K 5+4
11-2. Disassembly Of Generator
803 204-A
Y
Do not damage stator or rotor win-
dings during this procedure.
1 Stator
With engine properly supported with metal
bar (see Section 11-1), remove hardware se-
curing stator to engine. Remove the following
parts as needed:
2 Endbell
3 Exciter Stator
Exciter stator comes off with endbell.
4 Rotor
If engine must also be removed, remove en-
gine from base mounts.
Reassembly Instructions:
Reinstall engine and generator parts as
needed using torque values in table.
Reinstall upright assembly. Reconnect fuel
line.
Reconnect all leads. Use cable ties to secure
leads in existing wiring harness and away
from moving and hot parts.
Reconnect negative (–) battery cable. Rein-
stall panels, door, and exhaust pipe.
A 31 ft lb (42 N
.
m)
B 100 in lb (11 N
.
m)
C 25 ft lb (34 N
.
m)
D 12 ft lb (16 N
.
m)
E 42 ft lb (57 N
.
m)
Torques:
2
3
4
1
A
A
B
C
D
E
D