18
To enter test mode:
Press and hold Settings for 3 seconds -
Press Power - until you see IGN
VEr XXX
displays current software version.
Screen 5-1
is test mode for your auger motor. You should
be able to look in your grill’s fire pot and see the end of the
auger turning very slowly.
Screen 5-2
is test mode for your grill’s ignition system. You
should be able to look into grill’s fire pot and see your igniter
begin to glow within a few minutes. DO NOT TOUCH THE
IGNITER.
Screen 5-3
is test mode for your grill’s blower fan. You
should be able to hear the fan blowing.
Screen 5-4
is test mode for your grill’s control knob. You can
turn the knob to see the 000 value increase and decrease as
you turn the knob.
Screen 5-5
is test mode for your grill’s temperature sensor
and Probe A and Probe B. You can see the temperature
values for each displayed on the screen (a value of - - -
means the probe is not plugged in or the grill’s sensor is not
connected).
Screen 5-6
is an internal quality control screen that has no
function for the user.
Screen BYE
is the final screen of the test mode. Pressing the
power button again will return you to Screen 5-1. Pressing
the settings button will return you to the Settings Menu, at
which time you can hold the Settings Button to exit Settings
Menu and get you back to a blank screen.
Test Mode
VEr XXX
Screen 5-1
Screen 5-2
Screen 5-3
VEr
###
5-1
AUG
5-2
0
IGN
5-3
0
FAN
Screen 5-4
Screen 5-5
Screen 5-6
Screen BYE
5-4
000
NOb
5-5
---
85°F
BYE
Probe A
---
Probe B
Actual
5-6
UF1
